The third General Assembly Meeting of VULKANO project took place in Warsaw on 4-5th July 2018 in presence of the Project Technical Advisor of the European Commission. The meeting gathered more than 30 members of 11 companies located in 6 different countries, in order to review the general status of the project after the first twenty four months of execution.
The project has satisfactorily achieved its objectives throughout this time, obtaining useful results:
- Operating conditions of the two demo site furnaces (steel and ceramic sector) and the requirements from the new technology solutions to be implemented at the furnace have been defined.
- Development of Phase Change Materials (PCM) high temperature (up to 900ºC). After the simulations and the laboratory tests, the production of new PCM has started as well as it pre-implementation in ceramic furnace.
- Development of new refractories with the use of byproducts for the production of innovative materials. For steel furnace, materials based on alumina are used, while based on zirconia materials have been employed for the ceramic furnace.
- Feasibility of the natural gas substitution by the different syngas sources and Computational Fluid Dynamics (CFD) simulation of syngas/natural gas mixtures with adapted co-firing burners. Two different burners have been developed: dedicated burner for 100% of syngas combustion and hybrid burner for 0-100% of syngas / natural gas combustion.
- Optimization of the furnace monitoring and control system through metaheuristics algorithms and implementation. Steel case: automatization of gasifier&co-firing system. Ceramic case: control of PCM system.
- Presentation of a flexible holistic in-house predictive tool prioritizing the critical parameters for each sector with a video explicative.
- Start the construction of the replica furnace.
- Updated market analysis presentation.
With the results of the assessment, IEn as Task leader on WP5.2, 5.3 and 5.4, presented the co-firing CFD simulations, jointly undertaken by IEn and CIDAUT for the unmodified burners. It has been designed, simulated and experimentally tested two new burners: a hybrid one to operate between 0 to 100% of syngas substitution and a dedicated one to operate at 100% with syngas.
Furthermore, VULKANO project partners have already generated seven scientific publications and with an estimated number of 13 to 15 during 2019. CIDAUT has already presented one paper in ECOS Conference in Guimaraes entitled “Application of the CFD simulation to the evaluation of natural gas replacement by syngas in burners of the ceramic sector”.
More info: http://www.vulkano-h2020.eu/
Keywords: VULKANO, CFD, co-firing, syngas, furnaces