Noticias

A handful of electric vehicle and automated driving events

Cidaut has participated in EV2017, CIBIM17, 21CMH and LEVS2017 The last quarter of the year [...]

ReFreeDrive, developing new electric motor technologies

ReFreeDrive is our most recently approved H2020 project. With the title “Rare earth free e-Drives [...]

The new, revolutionary technology that can optimise your company’s productivity, reduce risks and bring down costs.

Digital twins are an enormous advance in engineering simulation. By using simulation software in conjunction [...]

Remaghic, two years running!

Last September in San Sebastian, the Remaghic Project partners held the 24 month meeting general [...]

CIDAUT participates in the International Course on Energy Production organized by BEST

On September 7th, the CIDAUT Foundation held the session «Generation of Renewable Thermal Energy in [...]

CIDAUT participates very actively in the sessions organized in Expobiomasa 2017

Expobiomasa 2017, the show organised by AVEBIOM (the Spanish Association for the Energy Recycling of [...]

Second Consortium Meeting of NEOHIRE

The second Consortium Meeting of NEOHIRE project (NEOdymium-Iron-Boron base materials, fabrication techniques and recycling solutions [...]

Launch of SAFE STRIP project with the participation of CIDAUT.

Safe Strip is the natural continuation of Safe Spot, where CIDAUT also played an important [...]

The MOVBIO Project for the promotion of energy valorisation of pruning biomass starts rolling

The MOVBIO Project, led by the CIDAUT and granted by the INTERREG V A España-Portugal [...]

VULKANO project continues with the II General Assembly

The second General Assembly of VULKANO project took place at the city of Celje (Slovenia) [...]

CIDAUT participates in the round table “The future of the automotive sector” organized by Hyundai, Bosch and El Español.

Madrid, 6th July 2017. The digital newspaper El Español, together with Hyundai and Bosch, organized [...]

Project Valorcomp started his journey

The kick-off meeting of project VALORCOMP took place on the 25th of July 2017. This [...]

ALMAGIC project kick-off meeting

The ALMAGIC consortium met in Munich last July 13-14th to kick-off the project. All partners [...]

How can your company maximize precision, cost savings and the security of the ADAS systems?

  The manufacturers and suppliers of the automotive industry work at a breakneck pace to [...]

What would happen if an overweight articulated truck crashed against a barrier at 70Kph?

Probably it would cause an accident with not determinate results for passenger and other vial´s [...]

CIDAUT and BASF presented their solutions to meet the next automotive trends

Boecillo (Valladolid, Spain), June 13 2017 CIDAUT Foundation, in conjunction with the chemical giant and [...]

Great participation in the HYACINTH Workshops in Spain

The Hyacinth project comes to an end with two workshops in Spain where CIDAUT participated [...]

CIDAUT Foundation attended the technical workshop on “JTI Clean Sky2: 6th call for proposals” at the Fundación Centro Tecnológico De Miranda De Ebro on 4 may 2017

The aim of the workshop was to provide practical information on the overall functioning of [...]

Final Event Udrive (European Naturalistic Driving Study)

The preliminary results from the 3 year naturalistic driving project have been presented at the [...]

ALIVE project final days

The Aachen Body Engineering Days (ABED), which took place on the 20-21st of September in [...]

Remaghic Mid Term Review and upcoming events

Partners of the Remaghic project met at the European Commission the past 2nd of February [...]

NEOHIRE project kick-off meeting

Last March 8th, the NEOHIRE consortium met in Brussels to kick-off the project. All partners [...]

Ciderplus Energy Box: efficient, smart, connected and renewable energy generation

Ciderplus Energy Box (CEB) was presented in the “Innovation Gallery” of GENERA 2017, the Energy [...]

Hydrogen deployment in the transport sector

A clean revolution is quietly taking place on Europe’s roads and hydrogen fuel cells can [...]

HYACINTH-project findings and next steps

HYACINTH Project (Hydrogen acceptance in the transition phase), funded by the Fuel Cell and Hydrogen [...]

VULKANO-project partners met at the First Steering Committee

The first Steering Committee of VULKANO project was held in Zaragoza from the 14th to [...]

Cidaut, Nissan and Renault participate in the meeting “Palencia: Capital del Vehículo Eléctrico”.

On December 1st, El Norte de Castilla organized a conference to bring the electric vehicle [...]

Successful end of Free-Moby and Plus-Moby projects.

Both European projects have run parallel for three years to balance the vehicle and infrastructure [...]

LIFE-SOUNDLESS project

In mid 2015, CIDAUT started the LIFE-SOUNDLESS project (New Generation of eco-friendly asphalts with recycled [...]

Cidaut supports a FACYL event providing its approach on Circular Economy

Last October 28th, the Automotive Cluster of Castilla y León (FACYL) organized a working day [...]

HYACINTH project held a progress meeting at Aberdeen

The latest HYACINTH progress meeting was held at Aberdeen (UK) in October 5th, 2016. During [...]

Cidaut shows the results of Plus-Moby at LEVS in Barcelona

On the 20th and 21st of September, the first Light Electric Vehicle Summit was held [...]

Cidaut organized a technical workshop on «Additive Manufacturing, 3D Printing And Scanning Technologies vs Industry 4.0”

The latest technological developments, hyperconnectivity and the globalisation of the economy are creating important challenges [...]

Cidaut takes part at EU MSCA-ETN DEMETER Summer School

H2020 Remaghic project, coordinated by CIDAUT is one of the co-organizers of the event led [...]

ALIVE: invitation to Final Workshop

Global warming concerns have led to the demand for higher energy-efficiency in the automotive industry. [...]

VULKANO Project is getting started

The VULKANO consortium met in Brussels last July 12-13th to kick-off the project. All partners [...]

Progress of HYACINTH Project in summer 2016

HYACINTH Project is gaining knowledge on social acceptance of Fuel Cell and Hydrogen (FCH) applications [...]

NEOHIRE project (H2020): CIDAUT will contribute to reduce the use rare earth elements in the permanent magnets present in wind turbine generators

In mid-July, we received the EC evaluation for NEOHIRE proposal. It was favorably evaluated within [...]

BRACKETWELD project (Clean Sky 2): CIDAUT will contribute to the development of an innovative welding process for the rapid assembly of thermoplastic brackets to thermoset-matrix composite structures

CIDAUT has recently started the project BRACKETWELD, a 3 years Research & Innovation Action launched [...]

The second HYACINTH project meeting and the Mid-Term Review were held in Brussels on 12-13 April 2016

Partners of the HYACINTH project (Hydrogen Acceptance in the Transition Phase) met at the FCH-JU [...]

SafetyCube Plenary Meeting, Barcelona – March 2016

On March 1-3, 2016, CIDAUT attended to Barcelona Plenary Meeting in order to discuss the [...]

MetalMorphosis Project finishes its activity with a successful Final Seminar.

More than 50 experts attended the final event. The main results and conclusions obtained during [...]

Meet CIDAUT at the EU Brokerage Event on KET in Horizon 2020

The German and French National Contact Point (NCP) and Enterprise Europe Network Alsace with the Europe Alsace [...]

The first REMAGHIC General Meeting takes place at CIDAUT facilities (Spain) on 24-25 February 2016

All partners of the REMAGHIC project (except Piaggio and Pininfarina, and the latter joined by [...]

CIDAUT will be at the World Manufacturing Forum in May

Source http://www.worldmanufacturingforum.org/ The World Manufacturing Forum (which is an event funded by the European Union [...]

Cidaut will be a member of the Scientific Reviewing Committee of the First World Light Electric Vehicle Summit (LEVS)

Light electric vehicles are becoming a key actor in the urban sustainable mobility, but nowadays [...]

CIDAUT attended the EU-Brazil Workshop on Advanced Biofuels

The European Commission (EC), The Brazilian Ministry of Science, Technology and Innovation (MCTI), the São [...]

Hipeba Project

HIPEBA (“High Performance Steel for Safer and more Competitive Safety Barriers”) is a EU-funded project [...]

SafetyCube Plenary Meeting, Gothenburg – November 2015

CIDAUT together with other vehicle, infrastructure and behavioural experts attended last SafetyCube Meeting on November [...]

Metalmorphosis’ final seminar

The 30 months Metalmorphosis Project is really close to its end. In order to show [...]

Remaghic general meeting

The REMAGHIC project continues its journey. On the 1st of February started the sixth month [...]

VRUITS project is assessing the commercialization of three different projects regarding pedestrian and cyclists

CIDAUT is a member of VRUITS project consortium which, among other activities, is assessing three [...]

CIDAUT: Dissemination session of VRUITS project results.

VRUITS (Improving the Safety and Mobility of Vulnerable Road Users through ITS Applications) is a [...]

CIDAUT at the European Researchers’ Night: The X National Congress: “Científic@s para un futuro mejor”

27/08/2015 by cidaut On Friday 25th of September the Valladolid Science Museum presented the 10th [...]

REMAGHIC project kick-off meeting held in Brussels.

Last September 10th, the REMAGIHC consortium met in Brussels to kick-off the project. All partners [...]

Freemoby Project Second Year Update.

Freemoby project has just passed its second review evaluation by the European Commission. Focused on [...]

ACCUBLADE project (CLEAN SKY): CIDAUT contributes to the validation of Active Gurney Flap systems for rotorcraft blades through innovative research on composites process and tooling design

One of the most challenging areas of research leaded by the Green Rotorcraft Consortium (GRC) [...]

3, 2, 1… Countdown for EVolution Prototypes Manufacturing

The EVolution Project is nowadays crossing its midterm on its amazing journey. Our itinerary began [...]

CIDAUT in MATCOMP 2015: The XI National Congress on Composite Materials

The XI Spanish National Congress on Composite Materials is organized by the Rey Juan Carlos [...]

REMART: End of the project

Since April 2013, CIDAUT has been coordinating REMART project, carrying out the technical tasks in [...]

CIDAUT on the vehicle Automatic pilot track

Progressive autonomous vehicle functions and levels have a great opportunity to create significant benefits to [...]

LIFE + New Jersey ends, proving that ELTs can improve concrete barrier behaviour

LIFE+ New Jersey Project has entered its final stretch, with the installation in a road [...]

ALIVE: achieved one of the main milestones

Since October 2012, CIDAUT has been working in ALIVE project together with other 20 partners [...]

CIDAUT will held a dissemination event on test performed in Spain for VRUITS project

VRUITS (Improving the Safety and Mobility of Vulnerable Road Users through ITS Applications) is a [...]

CIDAUT attended to the Kick off Meeting of the funded by the EC’s Horizon 2020 Programme SafetyCube project held at Loughborough last May the 19th and 20th

Funded with €5.8m by the EC’s Horizon 2020 Programme, and leaded by Loughborough University, SafetyCube [...]

Cidaut starts REMAGHIC, a H2020 project on the recycling of Rare Earth Elements applied to produce Magnesium alloys

At the end of April, the EC officially communicated Cidaut the outcome of the evaluation [...]

INROADS – Intelligent road studs lighting the way

The INROADS FP7 project led by TRL with seven European partners has developed intelligent road [...]

CLEANSKY: CIDAUT develops an optimized simulation model for the optimization of Liquid Resin Infusion (LRI) processes

One of the aims of Clean Sky is to develop new technologies for green manufacturing [...]

CIDAUT will be at MATCOMP 2015: The XI National Congress on Composite Materials

The XI Spanish National Congress on Composite Materials (http://matcomp15.org/) is jointly organized by the Rey [...]

On March 26th, Cidaut had the opportunity to participate in the workshop «Lean & Learn” about applying Lean Concepts in Project Management

It was organized by the Association for Organizational Learning SoL Spain (www.solspain.org). SoL Spain, is [...]